Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 201 - PERMITS AND GENERAL PROVISIONS
Subpart N - PERMIT BY RULE (PBR) - BOILERS LESS THAN OR EQUAL TO 100 MMBTU/HR
Section 201.630 - Nitrogen Oxide (NOx) Requirements

Current through Register Vol. 48, No. 38, September 20, 2024

The owner or operator of the PBR boiler must comply with the following, as applicable:

a) If the PBR boiler is subject to the requirements of 35 Ill. Adm. Code 217.Subpart D, comply with all the applicable requirements of 35 Ill. Adm. Code 217.Subparts D and E;

b) If the PBR boiler is subject to the requirements of 40 CFR 63.subpart DDDDD, comply with all applicable requirements, including the combustion tuning work practice requirements of 40 CFR 63.7540(a)(10), as incorporated by reference in Section 201.104; and

c) For a boiler with a maximum design heat input capacity greater than 50 MMBtu/hr, and not subject to either 35 Ill. Adm. Code 217.Subpart D or 40 CFR 63, subpart DDDDD, conduct combustion tuning for the boiler. This tuning must be conducted in each calendar year in which the boiler is operated, except for the calendar year in which the boiler first starts up and the calendar year in which the boiler is permanently removed from service. The combustion tuning must be conducted as specified by 40 CFR 63.7540(a)(10)(i) through (vi), as incorporated by reference in Section 201.104, and be conducted while burning the type of fuel that provided the majority of the heat input to the boiler over the 12 months prior to the tune-up.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.