Illinois Administrative Code
Title 32 - ENERGY
Part 351 - RADIATION SAFETY REQUIREMENTS FOR WIRELINE SERVICE OPERATIONS AND SUBSURFACE TRACER STUDIES
Subpart B - SPECIFIC LICENSING REQUIREMENTS
Section 351.130 - Specific License for Well Logging

Universal Citation: 32 IL Admin Code ยง 351.130

Current through Register Vol. 48, No. 12, March 22, 2024

The Agency will approve an application for a specific radioactive material license in well logging if the applicant meets the following requirements:

a) Complies with the general requirements specified in 32 Ill. Adm. Code 330.250.

b) Develops and submits to the Agency a program for training logging supervisors and logging assistants which specifies the details of:

1) Initial training;

2) On-the-job training;

3) Annual safety reviews to be provided by the licensee;

4) The means the applicant will use to demonstrate the logging supervisor's knowledge and understanding of and ability to comply with the Agency's regulations and licensing requirements and the Applicant's operating and emergency procedures; and

5) The means the applicant will use to demonstrate the logging assistant's knowledge and understanding of and ability to comply with the Agency's rules, license conditions, and the applicant's operating and emergency procedures.

c) Submits written operating and emergency procedures as required in Section 351.630.

d) Establishes and submits to the Agency a program for annual inspections of the job performance of each logging supervisor to ensure that the Agency's regulations, license conditions, and the applicant's operating and emergency procedures are followed. The applicant's annual inspection program shall include provisions to retain inspection records for 3 years after each annual internal inspection.

e) Submits a description of the overall organizational structure as it applies to the radiation safety responsibilities in well logging and specifies delegations of authority and responsibility.

f) If the Applicant intends to perform leak testing of sealed sources, establishes and submits to the Agency procedures for leak testing that include the following information:

1) The instruments to be used;

2) The methods of performing the analysis; and

3) The pertinent experience of the person who will analyze the wipe samples.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.