Idaho Administrative Code
Title IDAPA 58 - Environmental Quality, Department of
Rule 58.01.01 - RULES FOR THE CONTROL OF AIR POLLUTION IN IDAHO
Section 58.01.01.215 - MERCURY EMISSION STANDARD FOR NEW OR MODIFIED SOURCES

Universal Citation: ID Admin Code 58.01.01.215

Current through August 31, 2023

No owner or operator may commence construction or modification of a stationary source or facility that results in an increase in annual potential emissions of mercury of twenty-five (25) pounds or more unless the owner or operator has obtained a permit to construct under Sections 200 through 227. The permit to construct application must include an MBACT analysis for the new or modified source or sources for review and approval by the Department. A determination of applicability under Section 215 will be based upon the best available information. Fugitive emissions are not included in a determination of applicability under Section 215. (3-28-23)

01. Exemptions. New or modified stationary sources within a source category subject to 40 CFR Part 63 are exempt from the requirements of Section 215. (3-28-23)

02. Applicability. Except as provided in Subsection 215.01, Section 215 applies to all new or modified sources. (3-28-23)

Disclaimer: These regulations may not be the most recent version. Idaho may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.