Idaho Administrative Code
Title IDAPA 39 - Transportation, Department of
Rule 39.02.60 - RULES GOVERNING LICENSE PLATE PROVISIONS
Section 39.02.60.150 - VEHICLE DEALER AND MANUFACTURER LICENSE PLATES FORMATS
Universal Citation: ID Admin Code 39.02.60.150
Current through August 31, 2023
01. Designation for Plates. Plates issued to dealers will bear the designation "DLR" and plates issued to manufacturers will bear the designation "MFR". The sequential license plate number will be a maximum of two (2) digits. (3-21-22)
a. If a dealer or manufacturer is issued more
than ninety-nine (99) plates, an alpha character will be placed in the first
position, followed by a number. (3-21-22)
b. The dealer or manufacturer number will be
a maximum of four (4) digits. No dealer or manufacturer number may be preceded
by a zero (0): Dealer number one (1), plate number one (1): 1-01; Dealer number
one thousand one (1001), plate number one hundred (100): 1001-A1.
(3-21-22)
c. Dealer restricted
vehicle plates will display the abbreviation "DLR' within the lower left hand
box labeled "Restricted Vehicle". The dealer validation sticker will be
displayed within the box labeled "Dealer Validation Sticker".
(3-21-22)
Disclaimer: These regulations may not be the most recent version. Idaho may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
