Idaho Administrative Code
Title IDAPA 24 - Occupational and Professional Licenses, Division of
Rule 24.39.80 - IDAHO MINIMUM SAFETY STANDARDS AND PRACTICES FOR LOGGING
Subchapter O - CABLE-ASSISTED LOGGING SYSTEMS
Section 24.39.80.701 - MACHINE SAFETY REQUIREMENTS

Universal Citation: ID Admin Code 24.39.80.701

Current through September 2, 2024

01. Harvesting Machines. Harvesting machines for cable-assisted logging operations shall comply with each of the following:

a. Meet the protective structure requirements set forth in IDAPA 07.08.10.010;

b. Be equipped with a certified roll-over protective structure (ROPS); and

c. Be equipped with at least a four (4)-point restraint system approved by the machine's manufacturer or a qualified person.

02. System Approval. The cable-assisted logging system shall be designed and constructed for cable-assisted logging applications by the original equipment manufacturer, or approved for cable-assisted logging applications in writing by the original equipment manufacturer or a registered professional engineer.

03. Operation of System. The cable-assisted logging system shall be operated, inspected and maintained in accordance with the manufacturer's recommendations, specifications and limitations, or if no manufacturer's recommendations exist, then by the recommendations of a registered professional engineer. Cable-assisted logging systems not in safe operating condition shall be removed from service until repaired by a qualified person.

Effective March 31, 2022

Disclaimer: These regulations may not be the most recent version. Idaho may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.