Idaho Administrative Code
Title IDAPA 24 - Occupational and Professional Licenses, Division of
Rule 24.39.80 - IDAHO MINIMUM SAFETY STANDARDS AND PRACTICES FOR LOGGING
Subchapter G - FALLING AND BUCKING
Section 24.39.80.303 - MECHANICAL DELIMBERS AND FELLER BUNCHERS
Universal Citation: ID Admin Code 24.39.80.303
Current through September 2, 2024
01. General Requirements.
a. Before start-up or moving equipment, check the surrounding area for fellow employees or equipment.
b. If any protective device is missing, it is to be replaced as soon as possible. If it affects a safe operation, the machine is to be shut down.
c. When a machine is working, extreme caution shall be used when approaching. The operator shall be notified by radio or visual contact.
d. All raised equipment shall be lowered to the ground or to a safe position and the park brake set before leaving the machine.
Effective March 31, 2022
Disclaimer: These regulations may not be the most recent version. Idaho may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
