Idaho Administrative Code
Title IDAPA 24 - Occupational and Professional Licenses, Division of
Rule 24.35.01 - RULES OF THE OUTFITTERS AND GUIDES LICENSING BOARD
Section 24.35.01.206 - BOAT EQUIPMENT REQUIREMENTS

Universal Citation: ID Admin Code 24.35.01.206

Current through September 2, 2024

Each float or power boat used by an outfitting operation must be identified as follows:

01. Identification. Identification recorded with the Board on the outfitter application consisting of words, names, or letters not less than three (3) inches in height and be of a contrasting color indicating the current licensed outfitter and that is placed above the water line on each side of the bow or stern of the boat utilized by that outfitter in letters.

02. Clearwater. On Sections CL2 and CL3 of the Clearwater River, a sticker affixed to the surface of any boat used for anadromous fishing that is not less than eight (8) inches in height and placed immediately adjacent to the identification words, names or letters on each side of the boat towards the bow, identifying the boat as operated by a licensed outfitter. Stickers will be provided and sold annually by the Board or a vendor designated by the Board.

Effective April 6, 2023

Disclaimer: These regulations may not be the most recent version. Idaho may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.