Idaho Administrative Code
Title IDAPA 02 - Agriculture, Department of
Rule 02.02.02 - RULES GOVERNING APPLE GRADING AND STORAGE
Subchapter A - APPLE GRADES
Section 02.02.02.122 - TOLERANCES
Current through September 2, 2024
In order to allow for variations incident to proper grading and handling in each of the foregoing grades, the following tolerances are provided as specified:
01. Defects.
02. Applying Tolerances to Combination Grades. When applying tolerances to combination grades, no part of any tolerance is allowed to reduce, for the lot as a whole, the fifty percent (50%) of apples of the higher grade required in the combination but individual containers will not have less than forty percent (40%) of the higher grade.
03. Size. When size is designated by the numerical count for a container, not more than five percent (5%) of the apples in the lot may vary more than one fourth (1/4) inch in diameter. When size is designated by minimum or maximum diameter, not more than five percent (5%) of the apples in any lot may be smaller than the designated minimum and not more than ten percent (10%) may be larger than the designated maximum.
04. Firmness. Not more than five percent (5%) of the apples in any lot of Red Delicious and Delicious varieties can be further advanced in maturity than "Firm ripe" as defined in Subsection 010.05.c. Provided, the Idaho No. 1, Idaho No. 1 Hail, and Idaho Utility grades are exempt from this requirement.
Effective April 6, 2023