Idaho Administrative Code
Title IDAPA 02 - Agriculture, Department of
Rule 02.01.07 - RULES GOVERNING HEMP
Section 02.01.07.700 - SAMPLES AND TESTING
Current through September 2, 2024
01. Sampling Protocol. Sampling will be conducted according to the Department's Sampling Protocol. The Department will send samples to an accepted laboratory selected by the license holder at the time of sampling. The licensee bears the full cost of laboratory testing.
02. Laboratory Testing. An accepted laboratory must use appropriate and validated methods and procedures for all testing activities and evaluate the measurement of uncertainty. Samples must be tested using post-decarboxylation or a similarly reliable method by which the total THC concentration level reported accounts for the conversion of THCA into THC. An accepted laboratory will analyze regulatory samples according to the Department's Testing Protocol and the following steps:
03. Test Results. Any test result of a sample showing, with acceptable quality control passing, that the total THC content of the sample exceeds the acceptable hemp THC level shall be conclusive evidence that hemp from the lot represented by the sample contains a THC concentration in excess of that allowed.
04. Holding for Test Results. No hemp may be transferred or enter the stream of commerce until the license holder is notified that the hemp lot sampled and tested is compliant with an acceptable THC level when the application of the measurement of uncertainty is applied.
05. Retesting. A license holder may request a retest of the original sample within five (5) days from the date the license holder receives the results of the first test.
Effective March 15, 2022