Hawaii Administrative Rules
Title 6 - DEPARTMENT OF BUDGET AND FINANCE
Division - PUBLIC UTILITIES COMMISSION
Chapter 77 - TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE; MINIMUM SAFETY STANDARDS
Subchapter 8 - MINIMUM SAFETY STANDARDS - JOINING OF MATERIALS OTHER THAN BY WELDING
Section 6-77-85 - Cast iron pipe
Universal Citation: HI Admin Rules 6-77-85
Current through August, 2024
(a) Each caulked bell and spigot joint in cast iron pipe must be sealed with mechanical leak clamps.
(b) Each mechanical joint in cast iron pipe must have a gasket made of resilient material as the sealing medium. Each gasket must be suitably confined and retained under compression by a separate gland or follower ring.
(c) Cast iron pipe may not be joined by threaded joints.
(d) Cast iron pipe may not be joined by brazing.
Disclaimer: These regulations may not be the most recent version. Hawaii may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.