Hawaii Administrative Rules
Title 19 - DEPARTMENT OF TRANSPORTATION
Subtitle 4 - HIGHWAYS DIVISION
Chapter 104 - THE MOVEMENT BY PERMIT OF OVERSIZE AND OVERWEIGHT VEHICLES ON STATE HIGHWAYS
Section 19-104-6 - Contents of the application form

Universal Citation: HI Admin Rules 19-104-6

Current through February, 2024

(a) All of the applicable detailed information and data relative to gross weight, axle loads, axle spacing, dimensions, time of movement. route to be used, etc. requested on the form must be furnished by the applicant for the specific movement intended before the application can be properly reviewed and processed.

(b) For a continuous operation permit, the application shall fully describe the hauling or towing unit and the pieces of equipment to be mounted or towed together with all applicable data as required herein.

(c) Each application shall contain all data essential for the issuance of a permit. No action shall be taken on an application which is incomplete or which refers to information contained in a previous application that is not readily available.

(d) An application for an overweight movement shall be accompanied by sketches showing plan and elevation of the wheel arrangements, dimensions and distribution of loads.

Disclaimer: These regulations may not be the most recent version. Hawaii may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.