Hawaii Administrative Rules
Title 12 - DEPARTMENT OF LABOR AND INDUSTRIAL RELATIONS
Subtitle 8 - HAWAII OCCUPATIONAL SAFETY AND HEALTH DIVISION
Part 10 - BOILER AND PRESSURE VESSEL
Chapter 221 - EXISTING AND NEW BOILERS AND PRESSURE VESSELS (REPEALED)
- Section 12-221-1 - Inspection of boilers and pressure vessels (Repealed)
- Section 12-221-2 - Boilers and pressure vessels improperly prepared for inspection (Repealed)
- Section 12-221-3 - Lap-seam crack (Repealed)
- Section 12-221-4 - Pressure tests (Repealed)
- Section 12-221-5 - Safety-valve minimum capacity requirements (Repealed)
- Section 12-221-6 - Safety valve stamping requirements (Repealed)
- Section 12-221-7 - Pressure reducing valves (Repealed)
- Section 12-221-8 - Boiler-blowoff equipment (Repealed)
- Section 12-221-9 - Location of discharge piping outlets (Repealed)
- Section 12-221-10 - Supports (Repealed)
- Section 12-221-11 - Clearances (Repealed)
- Section 12-221-12 - Exits from boiler room (Repealed)
- Section 12-221-13 - Combustion air and ventilation requirements (Repealed)
- Section 12-221-14 - Gas burners (Repealed)
- Section 12-221-15 - Suggestions for operation (Repealed)
- Section 12-221-16 - Use of time clocks prohibited (Repealed)
- Section 12-221-17 - Welding (Repealed)
- Section 12-221-18 - Ratings for valves, piping, and appurtenances (Repealed)
Current through August, 2024
Disclaimer: These regulations may not be the most recent version. Hawaii may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
