Compilation of Rules and Regulations of the State of Georgia
Department 391 - RULES OF GEORGIA DEPARTMENT OF NATURAL RESOURCES
Chapter 391-3 - ENVIRONMENTAL PROTECTION
Subject 391-3-20 - INSPECTION AND MAINTENANCE
Rule 391-3-20-.08 - Quality Control and Equipment Calibration Procedures
Universal Citation: GA Rules and Regs r 391-3-20-.08
Current through Rules and Regulations filed through September 23, 2024
(1) All Georgia Analyzer Systems (GAS) shall, at a minimum, be calibrated according to the procedures and schedules as prompted by the GAS.
(2) No person shall operate a GAS for the purpose of performing an emissions inspection unless the Georgia Analyzer System:
(a) has passed all calibrations, audits, and leak checks as prompted by the GAS;
(b) in the case of a GAS that is not a mobile GAS, is connected to the dedicated data transmission line as described in 391-3-20-.09(2)(i); and
(c) in the case of a GAS that is a mobile GAS, is connected to the dedicated data transmission line within 72 hours of any inspection performed at a fleet or car dealer location and at all times when the mobile GAS is located at the inspection station location identified on the Certificate of Authorization.
(3) Any station or GAS that has not performed an inspection in more than 90 days, shall not resume performing inspections until the Management Contractor has been contacted and a passing audit has been performed by the Management Contractor on the station's GAS(s).
O.C.G.A. § 12-9-40, et seq., as amended.
Disclaimer: These regulations may not be the most recent version. Georgia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
