Compilation of Rules and Regulations of the State of Georgia
Department 120 - OFFICE OF COMMISSIONER OF INSURANCE, SAFETY FIRE COMMISSIONER AND INDUSTRIAL LOAN COMMISSIONER
Chapter 120-3 - RULES OF SAFETY FIRE COMMISSIONER
Subject 120-3-27 - RULES AND REGULATIONS FOR AMUSEMENT RIDE SAFETY
Rule 120-3-27-.31 - Inlets and Outlets
Current through Rules and Regulations filed through March 20, 2024
(1) Pool inlets and outlets shall produce a uniform circulation of water to maintain a uniform disinfectant residual.
(2) The number and location of pool inlets shall be adequate and appropriate to insure that uniform water quality, as described herein, is maintained at all times.
(3) At least one outlet shall be provided at the lowest point of the floor to completely drain the entire floor. When the main outlets for pool pump suction are installed in the pool floor near one end, the spacing shall not be greater than 20 feet (6.1 m) on centers, and an outlet shall be provided not more than 15 feet (4.57 m) from each side wall. The total velocity through grate openings shall not exceed 2 feet per second (61 cm/second). Grate openings shall be designed to prevent fingers and toes, etc., from being trapped in the openings.
(4) Outlets on pump suction, except those for skimmers shall be covered with suitable protective grates that cannot be removed except with tools.
(5) An over-the-rim spout, if used shall not create a hazard. Its open end shall have no sharp edges and shall not protrude more than 2 inches (5.1 cm) beyond the edge of the pool.
(6) Inlets from the circulation system shall not project enough to cause harm to the splash pool user.
O.C.G.A. Sec. 25-15-59.
