Current through Reg. 50, No. 249, December 24, 2024
(1) Service Tags, Annual Maintenance.
(a) Approved standard service tags shall meet
the following specifications and shall be arranged as indicated in Figure "A."
In lieu of using the standard "tie-on" type service tag, a pressure sensitive
label or decal meeting the same specifications as indicated in Figure "A" may
be used. Tags, pressure sensitive labels or decals may be printed or otherwise
established for any number of years not in excess of five years.
Click here to view
imageSHAPE \* MERGEFORMAT
Click here to view
image
(b)
Approved standard service tags, pressure sensitive labels or decals shall bear
the following information:
2. Serial Number of
Extinguisher.
3. Name of person who
performed the service on the extinguisher. Initials are not
acceptable.
4. Permit number of the
person who serviced the extinguisher.
5. Indicate the type of service
performed.
6. Indicate the type of
extinguisher involved.
7. Indicate
the month and the year that the service was performed by means of perforation
so that only the specific month is indicated.
(c) For standard service tags, pressure
sensitive labels or decals, the printing may be any color.
(d) The size of the standard service tags,
pressure sensitive labels or decals shall be a minimum size of no less than 2
1/2'' and no greater than 3'' by no less than 5 1/4'' and no greater than 5
3/4''.
(e) A new tag, pressure
sensitive label or decal shall be attached to the portable fire extinguisher
each time a service is performed.
(f) The name, street address and telephone
number of the company or organization performing said service must be printed
on the front center section of the service tag, pressure sensitive label or
decal.
(g) The remainder of the
space available on the tag shall contain no erroneous, false, or misleading
statements.
(2) 6-year
Maintenance, Record Tags. A verification of service collar meeting the
requirements of Section 4-4.4.2, of NFPA 10, the edition as adopted in rule
chapter 69A-3, F.A.C., shall be provided each time an extinguisher is opened
for any type of service or for any purpose. A new verification service collar
shall be provided for an extinguisher each time an extinguisher is opened for
any type of internal service or for any other purpose. No advertisement or any
other information shall be included on the verification service
collar.
Rulemaking Authority 633.104, 633.308 FS. Law Implemented
633.104, 633.308 FS.
New 10-18-67, Amended 12-30-70, 8-15-85, Formerly 4A-21.41,
4A-21.041, Amended 2-7-89, 10-20-93, 11-21-01, Formerly
4A-21.241.
