Florida Administrative Code
64 - DEPARTMENT OF HEALTH
64B12 - Board of Opticianry
Chapter 64B12-10 - STANDARD OF PRACTICE FOR LICENSED OPTICIANS
Section 64B12-10.007 - Minimum Equipment Requirements

Universal Citation: FL Admin Code R 64B12-10.007

Current through Reg. 50, No. 187; September 24, 2024

The following equipment must be maintained in each office in which an optician practices opticianry:

(1) Pupillary gauges;

(2) Thickness gauge;

(3) One set of hand tools necessary for the fitting of eye glasses;

(4) One lensometer or vertometer or similar instrument;

(5) One colmascope or similar instrument, when manufacturing glass lenses on the premises;

(6) One frame heater;

(7) One lens measure;

(8) Set of sample frames and mountings;

(9) Keratometer or similar instrument and slit lamp or similar instrument if fitting and adapting contact lenses pursuant to subsection 64B12-10.009(2), F.A.C.;

(10) A non-expired set of trial soft contact lenses, if fitting and adapting contact lenses pursuant to subsection 64B12-10.009(2), F.A.C.

Rulemaking Authority 484.005(2) FS. Law Implemented 484.002(3), 484.005(2) FS.

New 12-6-79, Formerly 21P-10.07, Amended 5-31-87, Formerly 21P-10.007, 61G13-10.007, 59U-10.007, Amended 8-16-04, 4-9-12.

Disclaimer: These regulations may not be the most recent version. Florida may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.