Florida Administrative Code
61 - DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
61G16 - Board of Professional Geologists
Chapter 61G16-2 - SEALS
Section 61G16-2.001 - Seals Acceptable to the Board
Universal Citation: FL Admin Code R 61G16-2.001
Current through Reg. 50, No. 187; September 24, 2024
(1) Pursuant to section 492.107, F.S., the Board hereby establishes as indicated below the forms of metal-type impression or stamped ink seals which are acceptable to the Board:
(2) The above referenced seals shall be no less than 15/8 inches in diameter.
Rulemaking Authority 492.104, 492.107 FS. Law Implemented 492.107 FS.
New 5-23-88, Formerly 21DD-2.001, Amended 1-11-95, 11-18-18.
Disclaimer: These regulations may not be the most recent version. Florida may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
