Florida Administrative Code
61 - DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
61G15 - Board of Professional Engineers
Chapter 61G15-36 - PRODUCT EVALUATION
Section 61G15-36.002 - Definitions

Universal Citation: FL Admin Code R 61G15-36.002

Current through Reg. 50, No. 249, December 24, 2024

(1) Product. A manufactured product or system required to be approved and certified as, for the purpose intended, at least equivalent of that required by the standards specified by the Florida Building Code or by a local authority having jurisdiction.

(2) Product Evaluation Documents. Engineering documents that define procedures, materials, devices, fabrication, and methods of construction and installation of a product, or standardized group of products, through product evaluation or rational analysis, with the objective of obtaining approval from the authority having jurisdiction of that product for installation. Product evaluation documents shall be generic and do not include documents prepared for a site specific project.

(3) Contractor. The Florida licensed contractor who pulls the permit for construction of a project into which the product is to be incorporated. The contractor is responsible for the selection, purchase and installation of the product.

Specific Authority 471.008, 471.033(2) FS. Law Implemented 553.842(6), 471.033 FS.

New 11-15-01.

Disclaimer: These regulations may not be the most recent version. Florida may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.