Florida Administrative Code
61 - DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
61G15 - Board of Professional Engineers
Chapter 61G15-35 - RESPONSIBILITY RULES OF PROFESSIONAL ENGINEERS PROVIDING THRESHOLD BUILDING INSPECTION
Section 61G15-35.004 - Common Requirements to All Engineers Providing Threshold Building Inspection Services as Special Inspectors

Universal Citation: FL Admin Code R 61G15-35.004

Current through Reg. 50, No. 249, December 24, 2024

(1) For each Threshold Building, a notice shall be filed for public record, bearing the name, address, signature, date and seal of the Special Inspector, certifying that the Special Inspector is competent to provide the engineering services for the specific type of structure.

(2) Special Inspectors utilizing Authorized Representatives shall ensure the Authorized Representative is qualified by education, licensure, or training to perform the duties assigned by the Special Inspector. Effective January 1, 2017, those qualifications shall include:

(a) Licensure as a professional engineer or architect, or

(b) Graduation from a four-year engineering education program in civil, structural or architectural engineering, or

(c) Possession of a professional Architecture degree, or

(d) Registration as a building inspector or general contractor, or

(e) Four years of Threshold Building inspection training on non-Threshold Buildings performed under the supervision of a Special Inspector who was in responsible charge of the trainee's work, or

(f) Possess certification(s) in the following area(s);
1. If inspecting concrete components, certification from the American Concrete Institute (ACI) in concrete construction special inspection pursuant to the qualifications of such certification established by ACI on January 1, 2017,

2. If inspecting masonry components, certification from the International Code Council (ICC) in structural masonry special inspection pursuant to the qualifications for such certification established by ICC on January 1, 2017,

3. If inspecting post-tensioned components, certification from the Post-Tensioning Institute (PTI) in post-tensioning inspection pursuant to the qualifications for such certification established by PTI on January 1, 2017,

4. If inspecting structural steel components, certification from the International Code Council or American Institute of Steel Construction (AISC) instructural steel special inspection pursuant to the qualifications for such certification established by ICC on January 1, 2017 or AISC on January 1, 2017,

5. If inspecting soil related components, certification from the International Code Council in basic soil special inspection pursuant to the qualifications for such certification established by ICC on January 1, 2017.

(3) Special Inspectors shall be in responsible charge of the work of the Authorized Representative, including reviewing reports and spot checks.

(4) Special Inspectors shall institute quality assurance procedures to include but not be limited to requiring unscheduled visits, utilization or relevant check lists, use of a Daily Inspection Report and insuring that the Special Inspector or the Authorized Representative is at the project whenever so required by the inspection plan.

Rulemaking Authority 471.008, 471.015(7) FS. Law Implemented 471.015(7) FS.

New 3-21-01, Amended 4-5-04, 5-6-09, 2-4-13, 12-23-15, 10-18-17.

Disclaimer: These regulations may not be the most recent version. Florida may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.