Florida Administrative Code
61 - DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
61G15 - Board of Professional Engineers
Chapter 61G15-33 - RESPONSIBILITY RULES OF PROFESSIONAL ENGINEERS CONCERNING THE DESIGN OF ELECTRICAL SYSTEMS
Section 61G15-33.005 - Design of Communications Systems

Universal Citation: FL Admin Code R 61G15-33.005

Current through Reg. 50, No. 249, December 24, 2024

(1) Communications systems are utilized to convey voice and data. Items to be considered in the design and analysis of communication systems are, as applicable to the particular project: cabling requirements, installation requirements, performance requirements, backup power requirements, the interrelationship of the various systems and applicable standards and regulatory requirements.

(2) Electrical Engineering Documents for communications systems must include the following information, if applicable to the particular project:

(a) System riser diagram for each cabling system.

(b) Equipment legend.

(c) Cabling type and performance data of the transmission.

(d) Device type and locations.

(e) Backup power sources where applicable.

(f) Installation, identification and testing requirements.

(g) Characteristics and locations of surge protective devices, if included in the engineering design.

Rulemaking Authority 471.008, 471.033(2) FS. Law Implemented 471.033 FS.

New 5-19-93, Formerly 21H-33.005, Amended 11-13-08, 12-4-17.

Disclaimer: These regulations may not be the most recent version. Florida may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.