Florida Administrative Code
61 - DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
61G15 - Board of Professional Engineers
Chapter 61G15-29 - CERTIFICATION
Section 61G15-29.001 - Certification Definition, Procedures, Prohibitions

Universal Citation: FL Admin Code R 61G15-29.001

Current through Reg. 50, No. 249, December 24, 2024

(1) The term "Certification" as used herein shall be as set forth in Rule 61G15-18.011(4), F.A.C.

(2) When an engineer is presented with a certification to be signed, dated, and sealed, he or she shall carefully evaluate that certification to determine if any of the circumstances set forth in subsection (3) would apply. If any of these circumstances would apply, that engineer shall either:

(a) modify such certification to limit its scope to those matters which the engineer can properly sign, date, and seal, or

(b) decline to sign, date and seal such certification.

(3) Engineers who sign, date and seal certifications which:

(a) relate to matters which are beyond the engineer's technical competence, or

(b) involve matters which are beyond the engineer's scope of services actually provided, or

(c) relate to matters which were not prepared under engineer's responsible supervision, direction, or control; would be subject to discipline pursuant to subsection 61G15-19.001(6), F.A.C.

Rulemaking Authority 471.008 FS. Law Implemented 471.025(3), 471.033(1)(j) FS.

New 1-16-91, Formerly 21H-29.001, Amended 4-2-12, 8-20-12.

Disclaimer: These regulations may not be the most recent version. Florida may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.