Florida Administrative Code
61 - DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
61G1 - Board of Architecture and Interior Design
Chapter 61G1-16 - SEALS AND PLANS
Section 61G1-16.004 - Title Block

Universal Citation: FL Admin Code R 61G1-16.004

Current through Reg. 50, No. 187; September 24, 2024

A title block must appear on all architectural or interior design drawings and specification identification sheets that are required to be signed and sealed. The title block must, at a minimum, contain the following information:

(1) Firm name, address, and telephone number.

(2) Qualifier's license number.

(3) Name or identification of project.

(4) Date prepared.

(5) A space for the signature and dated seal.

(6) The printed name and the license/registration number of the person sealing the document.

(7) The date of plans revision, if the plans are revised.

(8) For the purposes of this rule, firm is defined to be a corporation, limited liability company, partnership, person practicing under a fictitious name, or person practicing architecture or interior design in his or her own name.

Rulemaking Authority 481.2055, 481.221(1), (3) FS. Law Implemented 481.219, 481.221(1), (3) FS.

New 9-7-00, Amended 3-16-14, 12-9-20.

Disclaimer: These regulations may not be the most recent version. Florida may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.