Delaware Administrative Code
Title 24 - Regulated Professions and Occupations
Department of State
Division of Professional Regulation
300 - Board of Architects
Section 300-7.0 - Rules of Professional Conduct - All architects shall abide by these Rules of Professional Conduct
Universal Citation: 24 DE Admin Code 300-7.0
Current through Register Vol. 28, No. 3, September 1, 2024
7.1 Competence
7.1.1 When practicing architecture, an architect shall act with reasonable care and competence, and shall apply the technical knowledge and skill which are ordinarily applied by architects of good standing, practicing in the same locality.
7.1.2 In designing a project, an architect shall take into account applicable building laws and regulations. While a registered architect may rely on the advice of other professionals (e.g., attorneys, engineers and other qualified persons) as to the intent and meaning of such regulations, once having obtained such advice, an architect shall not knowingly design a project in violation of such laws and regulation.
7.1.3 An architect shall undertake to perform professional services only when he or she, together with those whom the architect may engage as consultants, is qualified by education, training and experience in the specific technical areas involved.
7.1.4 No individual shall be permitted to engage in the practice of architecture if, in the Board's judgment, such individual's professional competence is substantially impaired by physical or mental disabilities.
7.2 Conflict of Interest
7.2.1 An architect shall not accept compensation for his/her services from more than one party on a project unless the circumstances are fully disclosed to and agreed to by (such disclosure and agreement to be in writing) all interested parties.
7.2.2 If an architect has any business association or direct or indirect financial interest which is substantial enough to influence his/her judgment in connection with the performance of professional services, the architect shall fully disclose in writing to his/her client or employee the nature of the business association or financial interest. If the client or employee objects to such association or financial interest, the architect will either terminate such association or interest or offer to give up the commission or employment.
7.2.3 An architect shall not solicit or accept compensation from material or equipment suppliers in return for specifying or endorsing their products. As used herein, "compensation" shall not mean customary and reasonable business hospitality, entertainment, or product education.
7.2.4 When acting as the interpreter of building contract documents and the judge of contract performance, an architect shall render decisions impartially, favoring neither party to the contract.
7.3 Full Disclosure
7.3.1 An architect, making public statements on architectural questions, shall disclose when he/she is being compensated for making such statement or when he/she has an economic interest in the issue.
7.3.2 An architect shall accurately represent to prospective or existing client or employee his/her responsibility in connection with work for which he/she is claiming credit.
7.3.3 If, in the course of his/her work on a project, an architect becomes aware of a decision taken by his/her employer or client, against such registered architect's advice, which violates applicable state or-municipal building laws and regulations which will, in the registered architect's judgment, materially and adversely affect the safety to the public of the finished project, the architect shall:
7.3.3.1 report the decision to the local building inspector or other public official charged with the enforcement of the applicable state or municipal building laws and regulations; and
7.3.3.2 refuse to consent to the decision; and
7.3.3.3 in circumstances where the architect reasonably believes that other such decisions will be taken, notwithstanding his/her objection, terminate his/her services with respect to the project. In the case of a termination in accordance with clause 3, the architect shall have no liability to his/her client or employer on account of such termination.
7.3.4 An architect shall not deliberately make a materially false statement or fail deliberately to disclose a material fact requested in connection with his/her application for a registration or renewal thereof.
7.3.5 An architect possessing knowledge of a violation of the provisions set forth in 7.0 by another architect shall report such knowledge to the Board.
7.4 Compliance with Laws
7.4.1 An architect shall comply with the registration laws and regulations governing his/her professional practice in any United States jurisdiction. An architect may be subject to disciplinary action if, based on grounds substantially similar to those which lead to disciplinary action in this jurisdiction, the architect is disciplined in any other United States jurisdiction.
7.4.2 An employer engaged in the practice of architecture shall not have been found by a court or an administrative tribunal to have violated any applicable federal or state law protecting the rights of persons working for the employer with respect to fair labor standards or with respect to maintaining a workplace free of discrimination. For purposes of this rule, any registered architect employed by a firm engaged in the practice of architecture who is in charge of the firm's architectural practice, either alone or with other architects, shall be deemed to have violated this rule if the firm has violated this rule.
7.5 Professional Conduct
7.5.1 Each office in Delaware offering architectural services shall have an architect resident and regularly employed in that office having direct supervision of such work.
7.5.2 An architect may sign and seal technical submissions only if the technical submissions were:
(i) prepared by the architect;
(ii) prepared by persons under the architect's responsible control; or
(iii) prepared by another architect registered in this State if the signing and sealing architect has reviewed the other architect's work and either has coordinated the preparation of the work or has integrated the work into his or her own technical submissions, or
(iv) prepared by another architect registered in any United States jurisdiction and holding the certification issued by NCARB if (a) the signing and sealing architect has reviewed the other architect's work and has integrated the work into his/her own technical submissions and (b) the other architect's technical submissions are prototypical building documents. An architect may also sign and seal drawings, specifications, or other work which is not required by law to be prepared by an architect if the architect has reviewed such work and has integrated it into his/her own technical submissions. "Responsible control" shall be that amount of control over and detailed professional knowledge of the content of technical submissions during their preparation as is ordinarily exercised by a registered architect applying the required professional standard of care, including but not limited to an architect's integration of information from manufacturers, suppliers, installers, the architect's consultants, owners, contractors, or other sources the architect reasonably trusts that is incidental to and intended to be incorporated into the architect's technical submissions if the architect has coordinated and reviewed such information. Other review, or review and correction of technical submissions after they have been prepared by others does not constitute the exercise of responsible control because the reviewer has neither control over nor detailed knowledge of the content of such submissions throughout their preparation. Any registered architect signing or sealing technical submissions not prepared by that architect but prepared under the architect's responsible control by persons not regularly employed in the office where the architect is resident, shall maintain and make available to the Board upon request for at least five (5) years following such signing and sealing, adequate and complete records demonstrating the nature and extent of the architect's control over and detailed knowledge of such technical submissions throughout their preparation. Any registered architect signing or sealing technical submissions integrating the work of another architect into the registered architect's own work as permitted under clauses (iii) and (iv) above shall maintain and make available to the Board upon request for at least five (5) years following such signing and sealing, adequate and complete records demonstrating the nature and extent of the registered architect's review of and integration of the work of such other architect's work into his/her own technical submissions, and that such review and integration met the required professional standard of care.
7.5.3 An architect shall neither offer nor make any gifts, other than gifts of nominal value (including, for example, reasonable entertainment and hospitality), with the intent of influencing the judgment of an existing or prospective client in connection with a project in which the architect is interested.
7.5.4 An architect shall not engage in conduct involving fraud or wanton disregard of the rights of others.
7.5.5 An architect shall not make misleading, deceptive, or false statements or claims.
7.6 Design and Use of Architect's Seal
7.6.1 Pursuant to 24 Del.C. §
313, and subject to 6.7 and 7.5, each architect shall procure a seal, which shall contain the name of the architect; his/her registration number and the phrase REGISTERED ARCHITECT--STATE OF DELAWARE. This seal shall comply in all respects, including size and format, with the specimen shown below. The architect shall use his/her legal name on the Certificate of Registration, the seal and the license.
7.6.1.1 An electronic seal and signature are permitted to be used in lieu of a stamped impression of the architect's seal and original signature, 24 Del.C. §
313, when the following conditions are met:
7.6.1.1.1 It is a unique identification of the professional;
7.6.1.1.2 It is verifiable;
7.6.1.1.3 It is under the professional's direct and sole control;
7.6.1.1.4 It is linked to a document in such a manner that the electronic seal and signature are invalidated if any data in the document are changed;
7.6.1.1.5 The graphic image of the electronic seal shall have the same graphic appearance in all respects as 7.6.1 above.
7.6.2 Pursuant to 24 Del.C. §
313, all technical submissions which are published and/or are submitted to public authorities for building permits or regulatory approvals shall be sealed by the architect. Each design, each drawing, each set of specifications, all addenda and the cover of all other technical submissions shall be sealed. Other technical submissions include designs and drawings of a preliminary nature which are submitted to any public and/or the reviewing agency. When technical submissions are submitted for any permit, at each place where the seal is imprinted, there shall be an original or electronic signature, date of the signature, and the date of expiration of the architect's Delaware registration all located in close proximity to the seal in a format substantially similar to the following:
Signature: ___________________________________________________
Date of signature: _____________________________________________
Date of registration expiration: ___________________________________
7.6.3 The seal appearing on any technical submission shall be prima facie evidence that said technical submission was prepared by or under the direct supervision of the individual named on said submission.
7.6.4 All technical submissions prepared by an architect shall contain the following legend wherever the architect's seal appears: "The professional services of the architect are undertaken for and are performed in the interest of [name of person employing architect]. No contractual obligation is assumed by the architect for the benefit of any other person involved in the project."
7.6.5 Pursuant to 24 Del.C. §
303(c)(2), if a registered architect has not been employed to furnish construction contract administration services at the time such registered architect issues such technical submissions, the registered architect shall note on such technical submissions that the registered architect has not been so employed by including the following text, in minimum 12 point type, in close proximity to the seal:
The architect who sealed, signed and dated this document has not been employed to furnish construction contract administration services as defined in 24 Del.C. § 303(c).
7.6.6 No person shall remove or alter any seal, signature or date required by 7.61, 7.6.4 and/or 7.6.5.
Disclaimer: These regulations may not be the most recent version. Delaware may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
