Delaware Administrative Code
Title 24 - Regulated Professions and Occupations
Department of State
Division of Professional Regulation
2700 - Board of Registration for Professional Land Surveyors
Section 2700-16.0 - Professional Seals, Rubber Stamps and Signatures
Current through Register Vol. 28, No. 3, September 1, 2024
16.1 A raised seal shall be used wherever possible.
16.2 When a raised seal cannot be used, a rubber seal may be used, but only with red ink so that the lettering will stand out.
16.3 The signature must be originally handwritten.
16.4 The seal to be used by a Delaware licensee shall conform to the above regulation and have two concentric circles. The inner circle shall contain only the words "REGISTERED," "NO.," and "DELAWARE." The area between the two circles shall contain, at the bottom, the words "PROFESSIONAL LAND SURVEYOR" reading counterclockwise and at the top, the name of the licensee as written below, reading clockwise.
16.5 The seal acceptable to the Board is the one recognized in the trade as the No. 1 official pocket size, which has an inner circle 1" in diameter and an outer circle 1 1/2" in diameter. A sample is below. Replace JOHN DOE AND No. 123 with your name and number.
16.6 All new licensees shall provide to the Board a copy of both the raised and rubber seal within 30 days of issuance of their license.
