Delaware Administrative Code
Title 2 - Transportation
2000 - Department of Transportation
2400 - Division of Transportation Solutions
2402 - Manual on Uniform Traffic Control Devices (MUTCD)
Part 8 - Railroad
Chapter 8B - SIGNS AND MARKINGS
Section 8B.21 - NO TRAIN HORN Sign or Plaque (W10-9, W10-9P)

Universal Citation: 2 DE Admin Code 8B.21

Current through Register Vol. 28, No. 3, September 1, 2024

Standard:

01 Either a NO TRAIN HORN (W10-9) sign (see Figure 8B-4) or a NO TRAIN HORN (W10-9P) plaque shall be installed in each direction at each highway-rail grade crossing where a quiet zone has been established in compliance with 49 CFR Part 222 . If a W10-9P plaque is used, it shall supplement and be mounted directly below the Grade Crossing Advance Warning (W10 series) sign (see Figure 8B-4).

Disclaimer: These regulations may not be the most recent version. Delaware may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Delaware Administrative CodeTitle 2 - Transportation2000 - Department of Transportation2400 - Division of Transportation Solutions2402 - Manual on Uniform Traffic Control Devices (MUTCD)Part 8 - RailroadChapter 8B - SIGNS AND MARKINGSSection 8B.21 - NO TRAIN HORN Sign or Plaque (W10-9, W10-9P)