Delaware Administrative Code
Title 2 - Transportation
2000 - Department of Transportation
2400 - Division of Transportation Solutions
2402 - Manual on Uniform Traffic Control Devices (MUTCD)
Part 5 - Low Volume Roads
Chapter 5E - MARKINGS
Section 5E.02 - Center Line Markings
Universal Citation: 2 DE Admin Code 5E.02
Current through Register Vol. 28, No. 3, September 1, 2024
Standard:
01 Where center line markings are installed, no-passing zone markings in compliance with Section 3B.02 shall also be installed.
Guidance:
02 Center line markings should be used on paved low-volume roads consistent with the principles of this Manual and with the policies and practices of the road agency and on the basis of either an engineering study or the application of engineering judgment.
Option:
03 Center line markings may be placed on highways with or without edge line markings.
Disclaimer: These regulations may not be the most recent version. Delaware may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
