Delaware Administrative Code
Title 2 - Transportation
2000 - Department of Transportation
2400 - Division of Transportation Solutions
2402 - Manual on Uniform Traffic Control Devices (MUTCD)
Part 3 - Marking
Chapter 3B - PAVEMENT AND CURB MARKINGS
Section 3B.07 - Warrants for Use of Edge Lines
Current through Register Vol. 28, No. 3, September 1, 2024
Standard:
01 (DE Revision) Edge line markings shall be placed on paved and surface-treated roadways with the following characteristics:
. Interstates,
Guidance:
02 (DE Revision) Edge line markings should be placed on paved and surface-treated roadways where an engineering study indicates a need for edge line markings.
03 Edge line markings should not be placed where an engineering study or engineering judgment indicates that providing them is likely to decrease safety.
Option:
04 Edge line markings may be placed on streets and highways with or without center line markings.
05 Edge line markings may be excluded, based on engineering judgment, for reasons such as if the traveled way edges are delineated by curbs, parking, or other markings.
06 If a bicycle lane is marked on the outside portion of the traveled way, the edge line that would mark the outside edge of the bicycle lane may be omitted.
07 Edge line markings may be used where edge delineation is desirable to minimize unnecessary driving on paved shoulders or on refuge areas that have lesser structural pavement strength than the adjacent roadway.