Delaware Administrative Code
Title 2 - Transportation
2000 - Department of Transportation
2400 - Division of Transportation Solutions
2402 - Manual on Uniform Traffic Control Devices (MUTCD)
Part 2 - Signs
Chapter 2H - GENERAL INFORMATION SIGNS
Section 2H.04 - Miscellaneous Information Signs

Universal Citation: 2 DE Admin Code 2H.04

Current through Register Vol. 28, No. 3, September 1, 2024

Support:

01 Miscellaneous information are used to point out geographical features, such as rivers and summits, and other jurisdictional boundaries (see Section 2H.02). Figure 2H-1 shows examples of miscellaneous information (I-2 and I-3) signs.

Option:

01A (DE Revision) The ENTERING CORPORATE LIMITS (I-2-DE1) and LEAVING CORPORATE LIMITS (I-2-DE2) signs (see Figure 2H-1) may be installed at jurisdictional boundaries.

01B (DE Revision) The State of Delaware (SI-2-DE) sign (see Figure 2H-1) may be installed along roadways entering the state boundary.

02 Miscellaneous information signs may be used if they do not interfere with signing for interchanges or other critical points.

Guidance:

03 Miscellaneous information signs should not be installed unless there are specific reasons for orienting the road users or identifying control points for activities that are clearly in the public interest. If Miscellaneous information signs are to be of value to the road user, they should be consistent with other guide signs in design and legibility. On all such signs, the design should be simple and dignified, devoid of any tendency toward flamboyant advertising, and in general compliance with other signing.

Disclaimer: These regulations may not be the most recent version. Delaware may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.