Delaware Administrative Code
Title 2 - Transportation
2000 - Department of Transportation
2400 - Division of Transportation Solutions
2402 - Manual on Uniform Traffic Control Devices (MUTCD)
Part 2 - Signs
Chapter 2F - TOLL ROAD SIGNS
Section 2F.02 - Sizes of Toll Road Signs
Universal Citation: 2 DE Admin Code 2F.02
Current through Register Vol. 28, No. 3, September 1, 2024
Standard:
01 Except as provided in Section 2A.11, the sizes of toll road signs that have standardized designs shall be as shown in Table 2F-1.
Support:
02 Section 2A.11 contains information regarding the applicability of the various columns in Table 2F-1.
Option:
03 Signs larger than those shown in Table 2F-1 may be used (see Section 2A.11).
Table 2F-1. Toll Road Sign and Plaque Minimum Sizes
Sign or Plaque | Sign Designation | Section | Conventional Road | Expressway | Freeway | Minimum | Oversized | |
Single Lane | Multi-Lane | |||||||
Toll Rate | R3-28 | 2F.05 | - | - | 114 x 48 | 114 x 48 | - | - |
Pay Toll (plaque) | R3-29P | 2F.05 | - | - | 24 x 18 | 24 x 18 | - | - |
Take Ticket (plaque) | R3-30P | 2F.05 | - | - | 24 x 18 | 24 x 18 | - | - |
Pay Toll XX Miles Cars (price) | W9-6 | 2F.06 | 96 x 66 | 96 x 66 | 96 x 66 | 96 x 66 | - | - |
Pay Toll XX Miles Cars (price) (plaque) | W9-6P | 2F.07 | 288* x 36 | 288* x 36 | 288* x 36 | 288* x 36 | - | - |
Stop Ahead Pay Toll Cars (price) | W9-6a | 2F.08 | 114 x 66 | 114 x 66 | 114 x 66 | 114 x 66 | - | - |
Stop Ahead Pay Toll (plaque) | W9-6aP | 2F.09 | 252* x 36 | 252* x 36 | 252* x 36 | 252* x 36 | - | - |
Last Exit Before Toll (plaque) | W16-16P | 2F.10 | - | - | 252* x 36 | 252* x 36 | - | - |
Toll | M4-15 | 2F.11 | 24 x 12 | 24 x 12 | 36 x 18 | 36 x 18 | 24 x 12 | 36 x 18 |
No Cash | M4-16 | 2F.12 | 24 x 12 | 24 x 12 | 36 x 18 | 36 x 18 | 24 x 12 | 36 x 18 |
Toll Collector Symbol | M4-17 | 2F.13 | - | - | 48 x 48 | 48 x 48 | - | - |
Exact Change Symbol | M4-18 | 2F.13 | - | - | 48 x 48 | 48 x 48 | - | - |
ETC Only | M4-20 | 2F.12 | 24 x 24 | 24 x 24 | 36 x 36 | 36 x 36 | 24 x 24 | 36 x 36 |
* The width shown represents the minimum dimension. The width shall be increased as appropriate to match the width of the guide sign.
Notes:
1.
Larger signs may be used when appropriate
2. Dimensions in inches are shown as width x
height
Disclaimer: These regulations may not be the most recent version. Delaware may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.