Delaware Administrative Code
Title 2 - Transportation
2000 - Department of Transportation
2400 - Division of Transportation Solutions
2402 - Manual on Uniform Traffic Control Devices (MUTCD)
Part 2 - Signs
Chapter 2C - WARNING SIGNS AND OBJECT MARKERS
Section 2C.28 - BUMP and DIP Signs (W8-1, W8-2)
Universal Citation: 2 DE Admin Code 2C.28
Current through Register Vol. 28, No. 3, September 1, 2024
Guidance:
01 BUMP (W8-1) and DIP (W8-2) signs (see Figure 2C-6) should be used to give warning of a sharp rise or depression in the profile of the road.
Option:
02 These signs may be supplemented with an Advisory Speed plaque (see Section 2C.08).
Standard:
03 The DIP sign shall not be used at a short stretch of depressed alignment that might momentarily hide a vehicle.
Guidance:
04 A short stretch of depressed alignment that might momentarily hide a vehicle should be treated as a no-passing zone when center line striping is provided on a two-lane or three-lane road (see Section 3B.02).
Disclaimer: These regulations may not be the most recent version. Delaware may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
