Delaware Administrative Code
Title 2 - Transportation
2000 - Department of Transportation
2400 - Division of Transportation Solutions
2402 - Manual on Uniform Traffic Control Devices (MUTCD)
Part 2 - Signs
Chapter 2B - REGULATORY SIGNS, BARRICADES, AND GATES
Section 2B.51 - Pedestrian Crossing Signs (R9-2, R9-3)
Current through Register Vol. 28, No. 3, September 1, 2024
Option:
01 Pedestrian Crossing signs (see Figure 2B-26) may be used to limit pedestrian crossing to specific locations.
Standard:
02 If used, Pedestrian Crossing signs shall be installed to face pedestrian approaches.
Option:
03 Where crosswalks are clearly defined, the CROSS ONLY AT CROSSWALKS (R9-2) sign may be used to prohibit pedestrians from crossing at locations away from crosswalks.
04 The No Pedestrian Crossing (R9-3) sign may be used to prohibit pedestrians from crossing a roadway at an undesirable location or in front of a school or other public building where a crossing is not designated.
05 The NO PEDESTRIAN CROSSING (R9-3a) word message sign may be used as an alternate to the R9-3 symbol sign. The USE CROSSWALK (R9-3bP) supplemental plaque, along with an arrow, may be installed below either sign to designate the direction of the crossing.
Support:
06 One of the most frequent uses of the Pedestrian Crossing signs is at signalized intersections that have three crossings that can be used and one leg that cannot be crossed.
Guidance:
07 The R9-3bP plaque should not be installed in combination with educational plaques.
Option:
Guidance:
Option:
Guidance: