Delaware Administrative Code
Title 2 - Transportation
2000 - Department of Transportation
2400 - Division of Transportation Solutions
2402 - Manual on Uniform Traffic Control Devices (MUTCD)
Part 2 - Signs
Chapter 2B - REGULATORY SIGNS, BARRICADES, AND GATES
Section 2B.48 - Placement of Parking, Stopping, and Standing Signs
Current through Register Vol. 28, No. 3, September 1, 2024
Guidance:
01 When signs with arrows are used to indicate the extent of the restricted zones, the signs should be set at an angle of not less than 30 degrees or more than 45 degrees with the line of traffic flow in order to be visible to approaching traffic.
02 Spacing of signs should be based on legibility and sign orientation.
03 If the zone is unusually long, signs showing a double arrow should be used at intermediate points within the zone.
Standard:
04 If the signs are mounted at an angle of 90 degrees to the curb line, two signs shall be mounted back to back at the transition point between two parking zones, each with an appended THIS SIDE OF SIGN (R7-202P) supplemental plaque.
Guidance:
05 If the signs are mounted at an angle of 90 degrees to the curb line, signs without any arrows or appended plaques should be used at intermediate points within a parking zone, facing in the direction of approaching traffic. Otherwise the standards of placement should be the same as for signs using directional arrows.
