Delaware Administrative Code
Title 1 - Authorities, Boards and Commissions
700 - Delaware State Fire Prevention Commission
704 - Hazardous Processes and Operations
Chapter 3 - Explosives, Ammunition, Blasting Agents
Section 704-3-3.0 - Magazine Construction

Universal Citation: 1 DE Admin Code 704-3-3.0

Current through Register Vol. 28, No. 3, September 1, 2024

3.1 All magazine doors shall be constructed of one quarter inch (1/4") steel plate and lined with two inches (2") of hardwood. Hinges and hasps shall be attached to the doors by welding, riveting, or bolting (nuts on inside door). They shall be installed in such a manner that the hinges and hasps cannot be removed when the doors are closed and locked.

3.2 Lock Protection. Each door shall be equipped with two mortise locks; or with two padlocks fastened in separate hasps and staples; or with a combination of mortise lock and padlock; or with a mortise lock that requires two keys to open; or a three-point lock. Locks shall be tumbler proof. All padlocks shall be protected with one quarter inch (1/4") thick steel caps, constructed so as to prevent sawing or lever action on the locks or hasps.

Disclaimer: These regulations may not be the most recent version. Delaware may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.