Connecticut Administrative Code
Title 29 - Public Safety and State Police
161x - Security Services and Security Officers
Part II - Security Services and Security Officers
Section 29-161x-6 - Requirement for type of badge to be worn by uniformed security officer
Universal Citation: CT Reg of State Agencies 29-161x-6
Current through September 9, 2024
The prescribed badge shall be rectangular in shape, not less than two (2) inches in width, and not less than two and one-half (2.5) inches in height. The badge shall have straight sides, top and bottom. The badge shall be free of protruding angles or design on all sides. The badge shall contain the inscription of "security" and the licensee's name and state license number, which shall be sufficiently prominent to be identifiable at all times. The badge shall be metal or woven. Silk screening or any other similar method are not acceptable.
Disclaimer: These regulations may not be the most recent version. Connecticut may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
