Connecticut Administrative Code
Title 29 - Public Safety and State Police
136 - Safety Regulations for Amusement Rides and Devices
Connecticut Mechanical Amusement Ride and Device Regulations
Section 29-136-4a - Ride and device manufacturers

Universal Citation: CT Reg of State Agencies 29-136-4a

Current through September 9, 2024

(a) All mechanical amusement rides or devices manufactured after January 1, 1993 shall conform to the standards set forth in the fourth edition of the American Society for Testing and Materials (ASTM) Standards on Amusement Rides and Devices (1992).

(b) Homemade rides or devices shall be built to conform to or exceed the standards set forth in the fourth edition of the ASTM Standards on Amusement Rides and Devices (1992), and shall be certified by an engineer approved by the Commissioner of Public Safety as meeting such standard.

(c) The standards promulgated by the American Society for Testing and Materials (ASTM) are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959; telephone number, (610) 832-9500.

Disclaimer: These regulations may not be the most recent version. Connecticut may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.