Connecticut Administrative Code
Title 19 - Public Health and Safety
411 - Vertical Wheelchair Iifts
Section 19-411-C17 - Guide rail and guide rail fastening

Universal Citation: CT Reg of State Agencies 19-411-C17

Current through September 9, 2024

(a) Material. Platform guide rails shall be of metal construction. Steel construction shall conform to the requirements of Rule 200.2a (American National Standard Institute A-17-1-78). Metal other than steel shall conform to the requirements of Rule 200.2b (American National Standard Institute A-17-1-1978).

(b) Extension of guide rails. The top and bottom of each run of guide rails shall be so located in relation to the extreme positions of travel of the car that the car guiding members cannot travel beyond the ends of the guide rails.

(c) Guiding mechanism enclosures. The guiding mechanism shall be enclosed with a solid enclosure to prevent accidental contact. If openings are necessary in this enclosure for operation, they must reject a ban three-fourths (3/4) inch in diameter.

(d) Fastening, deflection and joints. Fastening, deflections, and joints shall conform to the requirement set forth in Rule 705.4 (American National Standard Institute A-17-1-1978).

Disclaimer: These regulations may not be the most recent version. Connecticut may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.