California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 73 - Stone, Clay and Glass Working Machines
Section 4625 - Pug Mills
Universal Citation: 8 CA Code of Regs 4625
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
Pug mills shall be guarded by:
(a) A substantial grating with openings not greater than 2 inches, or
(b) A hopper completely encircling the opening through which the machine is fed and extending 18 inches or more above the blades. In no case shall the top of the hopper be less than 36 inches from any floor or working level used by the pugmill operators or attendants.
1. Amendment filed 4-25-86; effective thirtieth day thereafter (Register 86, No. 17).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
