California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 70 - Chemical Industry Machines
Section 4566 - Extractors (Screw Cover Type)
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) Screw cover type extractors shall be equipped with a metal cover of at least No. 20 gage or its equivalent which shall cover the entire opening to the outer shell and shall be kept in its closed position when the extractor is in motion.
(b) The cover for the revolving container shall be held securely in place by a locknut on the spindle or the container shall revolve in the direction that will tend to tighten the spindle nuts.
1. Amendment filed 4-25-86; effective thirtieth day thereafter (Register 86, No. 17).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
