California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 69 - Food and Tobacco Machinery
Section 4550 - Caramel Slitter (Circular Knife Type)
Universal Citation: 8 CA Code of Regs 4550
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) The knives shall be completely covered with an adjustable guard (wire mesh openings not to exceed 1/4 inch)
(b) The material shall be fed through the knives by either;
(1) a feed belt
to carry the material under and away from the knives, or
(2) a slide feed set at an incline that will
permit the material to pass by gravity against the knives on the intake side
and away from the knives on the discharge side.
1. Amendment filed 5-1-86; effective thirtieth day thereafter (Register 86, No. 19).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
