California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 67 - Laundry and Dry Cleaning Equipment
Section 4485 - Drying Tumbler, End Loading

Universal Citation: 8 CA Code of Regs 4485

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Each tumbler shall be equipped with a device that will prevent energizing the drive motor which rotates the cylinder unless the shell door is closed. The device shall, however, allow for the momentary inching of the tumbler to facilitate loading and unloading.

(b) Each tumbler shall be provided with means to prevent accidental self-closing of the shell door during loading and unloading of the machine. This requirement does not apply to sideward-hinged doors that tend to remain open.

EXCEPTION:

1. This requirement does not apply to sideward-hinged doors that tend to remain open.

2. Tumblers designed without doors where the work is continuously loaded and discharged.

1. Repealer and new section filed 9-19-75; effective thirtieth day thereafter (Register 75, No. 38).
2. Amendment of subsection (a) filed 11-18-76; effective thirtieth day thereafter (Register 76, No. 47).
3. Amendment of subsection (b) filed 11-20-86; effective thirtieth day thereafter (Register 86, No. 47).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.