California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 64 - Pulp, Paper and Paperboard Mills
Section 4428 - Calenders and Similar Rolls
Universal Citation: 8 CA Code of Regs 4428
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) A guard or feeding device shall be provided which will allow feeding of the material without permitting the fingers of the operator to be caught in the nip point(s). This shall be accomplished by:
(1) Provision of a lever, rod
or treadle allowing the operator to immediately stop the rolls at the feed
point, or
(2) An automatic device
which will stop the rolls when the fingers approach the nip point(s).
NOTE: Use of a "Doctor Feed" is acceptable.
1. New section filed 9-15-86; effective thirtieth day thereafter (Register 86, No. 38).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
