California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 64 - Pulp, Paper and Paperboard Mills
Section 4424 - Converting Operations

Universal Citation: 8 CA Code of Regs 4424

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Rolls handled by cranes or hoists shall not be passed over employees.

(b) Cranes or hoist controls shall not be left unattended while a load is suspended.

(c) Where a hazard to employees exist, all power closing sections shall be equipped with an audible warning system which will be activated when closing the sections.

(d) Slitters, slotters, and scorers not in use shall be stored as not to create a hazard.

1. Repealer and new section filed 9-15-86; effective thirtieth day thereafter (Register 86, No. 38).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.