California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 64 - Pulp, Paper and Paperboard Mills
Section 4416 - Guillotine Type Roll Splitters
Universal Citation: 8 CA Code of Regs 4416
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) The blade activating control shall be either:
(1) A two-hand control requiring
concurrent hand application for each operator and helper who could reach into
the danger zone during the cutting process; or,
(2) A control is so located that the
operator(s) and helper(s) cannot reach into the danger zone during the cutting
process.
(b) Rolls shall be in the horizontal position while being cut and centered directly below the blade.
1. Repealer and new section filed 9-15-86; effective thirtieth day thereafter (Register 86, No. 38).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
