California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 59 - Woodworking Machines and Equipment
Section 4321 - Cracked Saws
Universal Citation: 8 CA Code of Regs 4321
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
Any band saw, band knife, circular saw or circular knife blade found to have developed a crack shall be removed from service until the width or diameter is so reduced as to eliminate the crack or the cracked section is repaired and the tension corrected.
1.
Repealer and new section filed 10-25-74; effective thirtieth day thereafter
(Register 74, No. 43).
2. Amendment filed 8-15-86; effective
thirtieth day thereafter (Register 86, No. 41).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.