California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 55 - Power Operated Presses
Section 4198 - Tonnage, Stroke, and Weight Designation
Universal Citation: 8 CA Code of Regs 4198
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) All dies shall be:
(1) Stamped with the tonnage and stroke
requirements, or have these characteristics recorded if these records are
readily available to the die setter;
(2) Stamped to indicate upper die weight when
necessary for air counter-balance pressure adjustment; and,
(3) Stamped to indicate complete die weight
when handling equipment may become overloaded.
1.
Repealer of subsections (b) and (c) filed 7-17-75; effective thirtieth day
thereafter (Register 75, No. 29).
2. New NOTE filed 10-31-85;
effective thirtieth day thereafter (Register 85, No.
44).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
