California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 8 - Points of Operation and Other Hazardous Parts of Machinery
Article 54 - Scope and General Definitions
Section 4187 - Rolls
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) The in-running side of the rolls shall be protected with a fixed or self-adjusting barrier so arranged that the material can be fed to the rolls without permitting the fingers of the operator to be caught between the rolls or between the guard and the rolls, or
(b) The control device for the rolls shall be of the constant contact type and shall be so located as to prevent the employees from contacting the danger zone, or
(c) The prime mover shall be equipped with an effective brake and there shall be installed across the front of the rolls at approximately knee height a control bar, lever or other device which when actuated will stop the motor and apply the brake.
NOTE:
EXCEPTION: Rolls which do not expose any employees to a point of operation hazard.
1. New
section filed 10-25-74; effective thirtieth day thereafter (Register 74, No.
43).
2. Amendment filed 12-26-80; effective thirtieth day thereafter
(Register 80, No. 52).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.