California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 4 - General Mobile Equipment and Auxiliaries
Article 25 - Industrial Trucks, Tractors, Haulage Vehicles, and Earthmoving Equipment
Section 3654 - Deflector Guards
Universal Citation: 8 CA Code of Regs 3654
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) Where vehicles are equipped with rollover protective structures and are subjected to the hazard of falling trees, brush, or the breaking of tow lines or winch cables, provision shall be made to protect against such hazards by means of:
(1) Shear or brush deflector guards
extending from the leading edge of the ROPS to the front part of the frame of
the vehicle or radiator guard or equivalent operator protection.
(2) Breaking line guards consisting of
adequately supported 1/4 -inch woven wire screens having not less than 1
1/2 inch nor more than 2-inch mesh (or equivalent) shall be located
between the lines and the operator.
1.
Amendment of subsection (a) filed 7-26-78; effective thirtieth day thereafter
(Register 78, No. 30).
2. New NOTE filed 4-30-85; effective
thirtieth day thereafter (Register 85, No. 18).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
