California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 4 - General Mobile Equipment and Auxiliaries
Article 24 - Elevating Work Platforms and Aerial Devices
Section 3642 - Elevating Work Platform Equipment
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) The platform deck shall be equipped with:
A guardrail or other structure around its upper periphery that shall be 42 inches high, plus or minus 3 inches, with a midrail. (Chains or the equivalent may be substituted where they give equivalent protection.) Where the guardrail is less than 39 inches high, an approved personal fall protection system as defined in Section 3207 of these Orders shall be used in accordance with the requirements of Section 3648(o) of this Article.
NOTE: Equipment buckets, tubs, or pin-on platforms refer to Section 3647.
EXCEPTION: Mast-climbing work platform controls shall be located only on the platform.
EXCEPTION: Toe boards may be omitted at the access openings and on television and movie camera booms.
1.
Amendment filed 10-12-84; effective thirtieth day thereafter (Register 84, No.
41).
2. Amendment of section heading and subsection (a) filed
10-4-99; operative 11-3-99 (Register 99, No. 41).
3. New subsections
(a)(1)-(2), amendment of subsection (d) and new subsections (g)-(g)(2) filed
2-27-2006; operative 3-29-2006 (Register 2006, No.
9).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.