California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 3 - General Plant Equipment and Special Operations
Article 21 - Use, Care, and Protection of Abrasive Wheels
Table A-1 - Minimum Dimensions for Straight Relieved Flanges

Universal Citation: 8 CA Code of Regs A-1
Current through Register 2024 Notice Reg. No. 38, September 20, 2024

A*

B

C

D

E

Diameter of Wheel

Minimum Outside Diameter of Flanges

Radial Width of Bearing Surface

Minimum Thickness of Flange at Bore

Minimum Thickness of Flange at Edge of Recess

__________________________________________________

Minimum

Maximum

InchesInchesInchesInchesInchesInches
1 3/8 1/16 1/8 1/16 1/16
2 3/4 1/8 3/16 1/8 3/33
31 1/8 3/16 3/16 3/33
4 1 1/8 1/8 3/16 3/16 1/8
5 1 3/4 3/16 1/4 1/4 1/8
62 1/4 1/2 3/8 3/16
7 2 1/2 1/4 1/3 3/8 3/16
83 1/4 1/2 3/8 3/16
10 3 1/2 3/16 3/8 3/8 1/4
124 3/16 3/8 1/3 3/16
14 4 1/2 3/8 3/4 1/2 3/16
16 5 1/2 1/2 1 1/2 3/16
186 1/2 1 3/8 3/8
207 3/8 1 1/4 3/8 3/8
22 7 1/2 3/8 1 1/4 3/8 7/16
248 3/4 1 1/4 3/8 7/16
26 8 1/2 3/4 1 1/4 1/8 1/2
2810 7/8 1 1/2 3/4 1/2
3010 7/8 1 1/2 3/4 3/8
361212 7/8 3/4
421412 7/8 3/4
4816 1 1/4 21 1/8 1
6020 1 1/4 21 1/4 1 1/8
7224 1 1/2 2 1/2 1 3/8 1 1/4
* Flanges for wheels under 2 inches diameter may be unrelieved and shall be maintained flat and true.

1. New NOTE filed 11-22-85; effective thirtieth day thereafter (Register 85, No. 48).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.