California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 3 - General Plant Equipment and Special Operations
Article 14 - Marine Terminal Operations
Table MT-1 - Number and Spacing of U-Bolt Wire Rope Clips
Universal Citation: 8 CA Code of Regs MT-1
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
|
Improved plow |
Number of Clips | ||||||||
|
steel, rope | Minimum | ||||||||
|
diameter | Drop | Other | spacing | ||||||
| inches | cm | forged | material | inches | cm | ||||
| * | -- | -- | -- | -- | -- | ||||
| 1/2 | 1.3 | 3 | 4 | 3 | 7.6 | ||||
| 5/8 | 1.6 | 3 | 4 | 3 3/4 | 9.5 | ||||
| 3/4 | 1.9 | 4 | 5 | 4 1/2 | 11.4 | ||||
| 7/8 | 2.2 | 4 | 5 | 5 1/4 | 13.3 | ||||
| 1 | 2.5 | 4 | 6 | 6 | 15.2 | ||||
| 1 1/8 | 2.9 | 5 | 6 | 6 3/4 | 17.1 | ||||
| 1 1/4 | 3.2 | 5 | 7 | 7 1/2 | 18.1 | ||||
| 1 3/8 | 3.5 | 6 | 7 | 8 1/4 | 21.0 | ||||
| 1 1/2 | 3.8 | 6 | 8 | 9 | 22.9 | ||||
| * Three clips shall be used on wire size less than 1/2 -inch diameter. | |||||||||
1. Repealer of Tables MT-1 through MT-5, Mt-7, MT-8 and renumbering and amendment of Tables MT-6, MT-9, MT-10 to Tables MT-1 through MT-3 filed 12-12-84; effective thirtieth day thereafter (Register 84, No. 50).
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
